Installation of all the rack hardware started after the racks were in place. In the rack would be installed switches, fiber box, UPS, punch panel, cable management bar, and a lot of cable when completed. The first floor rack would have a Fiber Box, and two switches; one will have a fiber module. The main fiber would come from Miller in to the first floor fiber box and then in to the switch/FX (fiber module). Then it feeds the other switch. From the first floor, a fiber 25’ jumper would go to the second floor into a fiber box. On the second floor the fiber would come out from the fiber box into the switch/FX. The other switch on the floor will have a matrix module installed in the switch. The matrix module would then connect to another switch. A total of three switches are on the second floor. The third floor is done the same way as the second, but it uses a 50’ fiber jumper from the first floor to the third.

Here is some pictures of the racks.